Little Giant VCMA-15ULT 115 Volt, 65 GPH, 1/50 HP Automatic Condensate Removal Pump with Tubing (no safety switch), Black/White, 554411

The Little Giant VCMA-15ULT condensate removal pump is a 1/50 hp pump that is designed for collecting, detecting, and removing condensation from air conditioners, dehumidifiers and refrigeration equipment. Its robust design is also suitable for high-efficiency gas furnace condensation and condensing boilers. This unit includes a 1/2-gallon condensate holding tank and a 3/8' O.D. Barbed discharge adapter with a built-in check valve, and 6' power cord with plug. This model also comes with 20' of 3/8' ID vinyl tubing. This model does not come with an overflow detection switch. The high-performance 115-volt motor is equipped with thermal overload protection and is CSA certified to US and Canadian standards. FEATURES & BENEFITS:- 1/50 hp high-performance motor pumps 65 gallons of water per hour- three 1-1/8' inlet openings - two with covers- ABS tank, motor cover, and volute- Stainless steel motor shaft- 1/2-gallon tank capacity- Includes 20' of 3/8' ID vinyl tubing INSTALLATION TIPS:- This pump comes shipped with a cardboard insert marked 'REMOVE'. Please remove and discard this insert before operating pump. Failure to remove the insert will cause the pump to overflow.- Check the tubing for obstructions or kinks. Clean or replace the tubing, if necessary.This is an authentic Little Giant product. The Little Giant brand is owned by Franklin Electric Co., Inc. .

• AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers
• THERMALLY PROTECTED, HIGH-PERFORMANCE MOTOR: 1/50 HP, 1.0 Amps, 60 Watts, 115 Volts, 60 Hz, fan-cooled motor; CSA certified to US and Canadian standards
• BUILT TO LAST: ABS tank, motor cover and volute; stainless steel motor shaft; thermal overload protected motor; can handle water temperatures up to 140° F (60° C)
• INCLUDES: 20' x 3/8" I.D. vinyl tubing, built-in check valve, three 1/8-inch diameter openings allowing multiple appliances to use one pump; DOES NOT INCLUDE OVERFLOW DETECTION SWITCH
• SPECIFICATIONS: 1/50 HP; 115 Volts, 1 Amp, 60 Watts, 3/8" OD barbed discharge, 65 GPH at 1' lift, 15' shut-off, max 6.5 PSI, three 1-1/8" inlet drain holes, 6' cord; max water temperature: 140° F